MB-50 Oil Purifier

• Remote alarm monitoring by sending alarm by e-mail and SMS test message directly from PLC to users.
• Dry weight is about 700 pounds (320 kgs).
• Dimension 38.75″ W x 42.60″ L x 62″ H

• MB-50 Oil Purifier
  • Flow Capacity = 30-50 gal per hour (110-190 liters per hour)
  • Oil Dialysis good for oil reservoir size 500-1,000 gallons or 2,000-4,000 liters
  • Example of Oil Dialysis Time 4,000 Liters:
  • One pass = 1,000 gal ÷ 50 gph = 20 hours
  • Five passes = 20 hours x 5 = 100 hrs or 4 days
• 4.8 KW Immersion heater with digital temperature control and built-in thermostat high temperature mechanical alarm shut down.
• Variable Speed Drive Control pump motor with analog signal for motor soft start long life and automatic oil pressure control.
• Dual oil purification in both Batch-to-Batch Oil Recycling Operation and Continuous Oil Dialysis Operation with Built-in multiple pass
• internal 25 gal oil tank.
• Ultrasonic non contact oil level switches with analog signal for internal tank control to prevent malfunction from excess oil contamination.
• 3.5″ LCD digital touch screen display for operational messages with NEMA 4 enclosure.
• WebMI Remote Control with Mobile Router & Static IP Address SIMM card.

• VJ-100 Vacuum Jet Dehydration
  • Flow Capacity = 9 GPM Dehydrating flow rate with 22 GPM pump capacity.
  • Capacity: 60 Liters per hour to remove 1% of water in oil.
  • Oil Dialysis good for oil reservoir size 500-1,500 gallons or 2,000-6,000 liters
  • Example of Oil Dialysis Time:
  • 2,000 liter @ 1% Water = 2,000÷ 60 L/H
  • = 33 hours x 3 passes = 99 hrs = 4 days
• Remove approximately 1/4 to 1/2 quart (500 cc) of dissolved water per hour.
• Water dehydration can be continuous or batch mode for more effective water removal.
• MS1 Moisture Sensor automatically controls water dehydrating time. The dehydrated discharge oil from VJ-100 will contain less than 100 ppm of water.
• Internal water dehydrating tank batch size is 30 gallons in the VJ-100 unit.
• Water starts to dehydrate at low oil temperature from 140 °F to 160 °F (60 °C to 71°C).
• Digital temperature control with high temperature alarm.
• 9.6 KW electric heater with 14 watts/sq. inch density.
• Water breakdown alarm when there is excessive water content in equipment oil reservoir.
• Variable Speed Drive (VSD) motor controls precision for oil flow and oil pressure.

VJ-100 Vacuum Jet Dehydrator

• 3.5″ LCD digital touch screen display for operational messages with NEMA 4 enclosure.
• Dry weight is about 400 pounds (180 kgs).
• Dimension 49″ W x 52″ Lx 62″ H.

AST-50 Oil Recycling Machine

• Dry weight is about 1,500 pounds (682 kgs).
• Dimension 42″ W x 60″ Lx 66″ H with 24″ dia PurePack Pot size.

• AST-50 Oil Recycling Machine
  • AST-50 machine is a combination of
  • = FC-1 + VJ-150 + MB-50 + MS1 + OS1 + WebMI
  • Recycling Capacity:
  • 200 Gal (800 Liters) per day @1% water
  • 300 Gal (1,200 Liters) per day @0.2% water
• Dual oil purification in both PurePack chemical treatment with oil dialysis and Vacuum Jet Dehydration for excessive water dehydration.
• PurePack oil dialysis and vacuum Jet dehydration time can be set according to excessive water content
• and particulate oil contamination.
• There are two built in oil tanks; a 30 gal (120 liters) Dehydration Tank for Vacuum jet Dehydration and a 30 gal (120 liters) Purified Oil Tank.
• Both continuous and batch-to-batch oil purification can be programmed to fit various degree of oil contamination
• for full automatic operation.
• Full automatic operation to draw dirty oil from pit and deliver dehydrated oil to oil tank or
• equipment oil reservoir.
• Water breakdown alarm when there is excessive water content in equipment oil reservoir.
• Variable Speed Drive (VSD) for motors for VJ-150 pump motor and MB-50 pump motor for precision control.
• Automatic shut down by pressure switch and timer switch with dual high temperature alarms in both
• PurePack operation and Vacuum Jet dehydration.

• AST-50C Oil Recycling Machine with Centrifuge
  • AST-50C machine is a combination of
  • = TC-8 + FC-1 + VJ-150 + MB-50 + MS1 + OS1 + WebMI
  • Recycling Capacity:
  • 250 Gal (1,000 Liters) per day @0.2% water & 10% sludge
  • 200 Gal (800 Liters) per day @1% water
  • 300 Gal (1,200 Liters) per day @0.2% water
• Pre-Treatment with TC-8 High speed centrifuge @30 gpm and 4,000-6,000 rpm
• TC-8 removes 5 kgs (10 Lb) per day from oil.
• Dual oil purification in both PurePack chemical treatment with oil dialysis and Vacuum Jet Dehydration for excessive water dehydration.
• PurePack oil dialysis and vacuum Jet dehydration time can be set according to excessive water content
• and particulate oil contamination.
• There are two built in oil tanks; a 30 gal (120 liters) Dehydration Tank for Vacuum jet Dehydration and a 30 gal (120 liters) Purified Oil Tank.
• Both continuous and batch-to-batch oil purification can be programmed to fit various degree of oil contamination
• for full automatic operation.
• Full automatic operation to draw dirty oil from pit and deliver dehydrated oil to oil tank or
• equipment oil reservoir.
• Water breakdown alarm when there is excessive water content in equipment oil reservoir.
• Variable Speed Drive (VSD) for motors for VJ-150 pump motor and MB-50 pump motor for precision control.
• Automatic shut down by pressure switch and timer switch with dual high temperature alarms in both
• PurePack operation and Vacuum Jet dehydration.

AST-50C with Centrifuge

• Dry weight is about 2,000 pounds (900 kgs).
• Dimension 42″ W x 75″ Lx 66″ H with 24″ dia PurePack Pot size.